Proface APL3000B - Node Box PC Bedienungsanleitung

PS-3650A / PS-3651A SeriesReference Manual

Chapter 1 Setting Up Software1-3 [Proface] Folder ConfigurationThe following diagram describes the configuration of this folder. (For all Windows® ve

A-1A Appendices1. I/O Map2. Memory Map3. Interrupt Map4. License AgreementThis chapter describes the hardware configuration of the I/O map, memory map

PS-3710A / PS-3711A Reference ManualA-21 I/O MapAddress AT System Device System Device0000H-001FH DMA controller (8237)0020H-003FH Interrupt controll

AppendicesA-32Memory Map*1 The capacity allocated by “IGD-Memory Size“ of the “Video (Intel IGD) Control Sub-Menu“ screen of the BIOS setting is 1MB.

PS-3710A / PS-3711A Reference ManualA-43Interrupt Map Hardware Interrupt List• The interrupts and DMA channel will change depending on the PnP featu

AppendicesA-5 DMA Channel ListDescriptionDMA 01234 Cascade to controller 1567For 8-bit transmissionFor 8-bit transmission

PS-3710A / PS-3711A Reference ManualA-64 License Agreement DMC Corporation Mouse Emulation Software (TSC-1310D/DD) Software License AgreementBefore

AppendicesA-74. Termination of the right of use(1) The licensee can at any time terminate the right to use the product by expunging or destroying the

PS-3710A / PS-3711A Reference ManualA-87. Restrictions on Export When the product is subjected to the regulation of the Foreign Exchange and Foreign

PS-3650A / PS-3651A Reference Manual1-41.3 Setting Up an HDD with Pre-installed OSIn the PS-A with pre-installed OS, the following software has been

Chapter 1 Setting Up Software1-5 [Proface] Folder ConfigurationA [Proface] folder is prepared on the C drive. The following diagram describes the con

PS-3650A / PS-3651A Reference Manual1-61.3.1 Setting Up OSSet up the Pre-installed OS in the PS-A unit. Windows® XP Setup ProcedureThis section desc

Chapter 1 Setting Up Software1-7(3) The [Help protect your PC] screen will appear. Choose whether to update Windows® automatically. To enable the Aut

PS-3650A / PS-3651A Reference Manual1-8(7) The [Checking your internet connectivity] screen will appear and your internet connectivity will be automa

Chapter 1 Setting Up Software1-91.4 PS-A Dedicated Software1.4.1 DriverFive types of dedicated PS-A drivers (Serial ATA Controller, Chipset, Audio, Gr

PS-3650A / PS-3651A Reference Manual1-10 Touch Panel Driver (Mouse Emulator)Mouse emulation softoware.Installing the driver enables to use touch pan

Chapter 1 Setting Up Software1-111.4.2 Special Application Program FeaturesThe special programs designed for the PS-A unit are located in the followin

PS-3650A / PS-3651A Reference Manual1-12 Keyboard Emulator: Keyclick.exeThis program allows the User’s mouse operation to perform keyboard-like data

1NOTES(1) The copyrights to all programs and manuals included in the “PS-3650A/PS-3651A” (hereinafter referred to as “PS-A”) are reserved by the Digit

Chapter 1 Setting Up Software1-13 System Monitoring/RAS Application: SystemMonitor.exeThe RAS and System Monitoring features allow users to monitor t

PS-3650A / PS-3651A Reference Manual1-14

2-12 System Setup1. System Setup Screen Operation2. System Parameters SettingThis chapter describes how to operate the system setup screen and how to

PS-3650A / PS-3651A Reference Manual2-22.1 System Setup Screen OperationThis section describes the operation of the BIOS setup screen.(1) Connect a U

Chapter 2 System Setup2-3 BIOS Setup Screen ConfigurationMain)Page 2-4Specify the drive/date.IDE Master / IDE Slave / SATA Port)Page 2-5Display the i

PS-3650A / PS-3651A Reference Manual2-42.2 System Parameters SettingSelect the items to set up the system information. Here, we introduce the system

Chapter 2 System Setup2-5 IDE Master / IDE Slave / SATA PortPoint out the cursor at the [Primary Master], [Primary Slave], [Secondary Master], or [Se

PS-3650A / PS-3651A Reference Manual2-6Transfer ModeSpecifies a method of transferring data. When the [Type] is [None], nothing is displayed. When [T

Chapter 2 System Setup2-7Local Bus IDE adapterSpecifies an enabled/disabled state for the IDE controller. Select from [Enable] or [Disabled]. The fact

PS-3650A / PS-3651A Reference Manual2-8Legacy USB SupportWhen the USB keyboard is used under DOS, specifies an enabled/disabled state for the USB. Th

2Information SymbolsThis manual uses the following icons:PS-3650A/PS-3651A Series Model NamesThe following models will be referred to as the PS-3650A/

Chapter 2 System Setup2-9 Advanced Chipset ControlSpecifies parameters for the chipset. Point the cursor to the [Advanced Chipset Control] on the [Ad

PS-3650A / PS-3651A Reference Manual2-10DDR SDRAM ConfigurationThe memory setting parameters are displayed. Point the cursor to the [DDR SDRAM Confi

Chapter 2 System Setup2-11 I/O Device ConfigurationSpecifies the address and interrupt level of the I/O ports. Point the cursor to the [I/O Device Co

PS-3650A / PS-3651A Reference Manual2-12 Power-ON ConfigurationSpecify the setting of power-on operation. Point the cursor to the [Power-ON Configur

Chapter 2 System Setup2-13 Keyboard FeaturesSpecifies the keyboard-related parameters. Point the cursor to the [Keyboard Features] on the [Advanced C

PS-3650A / PS-3651A Reference Manual2-14 Cache MemorySpecifies the parameters for the cache memory. Point the cursor to the [Cache Memory] on the [A

Chapter 2 System Setup2-15Cache xxxx-xxxxSpecifies the cache setting for each address. Select from [Disabled], [USWC Caching] (The address A000 - AFFF

PS-3650A / PS-3651A Reference Manual2-16 DMI Event LoggingSpecifies the parameters related to DMI event logging. Point the cursor to the [DMI Event

Chapter 2 System Setup2-172.2.3 IntelCPU Control Sub-MenuPoint the cursor to the [CPU Control Sub-Menu] on the [Intel] menu and press the [Enter] Key,

PS-3650A / PS-3651A Reference Manual2-18ACPI Control Sub-MenuPoint the cursor to the [ACPI Control Sub-Menu] on the [Intel] menu and press the [Enter

3ContentsNOTES... 1Information Symb

Chapter 2 System Setup2-19Thermal Control CircuitThis is a function that protects the CPU’s temperature, and its setting is a situation that if it exc

PS-3650A / PS-3651A Reference Manual2-20MCH Power Management Sub-MenuSpecifies the chipset (MCH) parameters. Point the cursor to the [MCH Power Mana

Chapter 2 System Setup2-21 Video (Intel IGD) Control Sub-MenuSpecifies the display-related parameters. Point the cursor to the [Video (Intel IGD) Con

PS-3650A / PS-3651A Reference Manual2-22 ICH Control Sub-MenuSpecifies the chipset (ICH) parameters. Point the cursor to the [ICH Control Sub-Menu]

Chapter 2 System Setup2-23Integrated Device Control Sub-MenuSpecifies whether to enable or disable USB, LAN, and PCMCIA. In [ICH Control Sub-Menu], p

PS-3650A / PS-3651A Reference Manual2-24 ACPI Control Sub-MenuPoint the cursor to the [ACPI Control Sub-Menu] on the [Intel] menu and press the [Ent

Chapter 2 System Setup2-25 APM Control Sub-MenuPoint the cursor to the [APM Control Sub-Menu] on the [Intel] menu and press the [Enter] Key, so that

PS-3650A / PS-3651A Reference Manual2-26 Workaround Control Sub-MenuPoint the cursor to the [Workaround Control Sub-Menu] on the [Intel] menu and pr

Chapter 2 System Setup2-272.2.4 SecuritySupervisor Password IsDisplayed as “Set” when the password is set. Since no password has been set at factories

PS-3650A / PS-3651A Reference Manual2-282.2.5 BootSpecifies an order for boot-up devices. The boot-up devices are specified in the Boot priority orde

43.4 Checking the Status of the PS-A Being Monitored ... 3-163.4.1 Description...

Chapter 2 System Setup2-292.2.6 ExitExit Saving ChangesPoint the cursor to the [Exit Saving Changes] on the [Exit] menu and press the [Enter] Key, the

PS-3650A / PS-3651A Reference Manual2-30

3-13 PS-A Monitoring Features1. RAS Features2. Setting Menus3. Monitoring the PS-A Status4. Checking the Status of the PS-A Being Monitored5. Checking

PS-3650A / PS-3651A Reference Manual3-23.1 RAS Features3.1.1 RAS Features Errors/Alerts which can be Detected by RAS FeaturesRAS is a device-level m

Chapter 3 PS-A Monitoring Features3-3 Error/Alert NotificationAlso, when either the one of the above mentioned error/alert occurs, or an external sig

PS-3650A / PS-3651A Reference Manual3-4 RAS Feature Overview*1 Be sure to adjust these settings according to your system’s specifications.*2 Output

Chapter 3 PS-A Monitoring Features3-5 Error/Alert NotificationThe method for notifying or handling errors/alerts can be selected from the following:

PS-3650A / PS-3651A Reference Manual3-6 External Input SignalsThe PS-A’s RAS interface connector uses the following input signals.• General-Purpose

Chapter 3 PS-A Monitoring Features3-7 External Output SignalThe PS-A’s RAS interface connector uses the following output signals.• General-Purpose Ou

PS-3650A / PS-3651A Reference Manual3-8• Be sure to operate the unit within its maximum load current. If the maximum load current exceeds this range,

5Setup operation flowThe following shows the flow of the setup operation from the purchase of the PS-A to the completion of the required setup before

Chapter 3 PS-A Monitoring Features3-93.2 Setting MenusMonitoring the PS-A Status) Description (page3-11)) Setup Procedure (page3-11)Checking the Statu

PS-3650A / PS-3651A Reference Manual3-10Monitoring Errors from a Remote Server) Description (page3-20)) System Configuration (page3-21)) Monitoring u

Chapter 3 PS-A Monitoring Features3-113.3 Monitoring the PS-A Status3.3.1 DescriptionBefore starting the setup procedure, specify the items you want t

PS-3650A / PS-3651A Reference Manual3-12(3) Check [Enable].(4) For [Error Action], check [Buzzer] and [PopupMessage].(5) Click [Apply].(6) Click [OK]

Chapter 3 PS-A Monitoring Features3-13• System Monitor also operates as Windows’s Services. When System Monitor applications do not start, the System

PS-3650A / PS-3651A Reference Manual3-143.3.3 When an Error Occurs(1) A buzzer sounds and a pop-up message is displayed.(2) An “×” mark appears on th

Chapter 3 PS-A Monitoring Features3-153.3.4 When an Alert Occurs(1) A buzzer sounds and a pop-up message is displayed.(2) An “×” mark appears on the i

PS-3650A / PS-3651A Reference Manual3-163.4 Checking the Status of the PS-A Being Monitored3.4.1 DescriptionCheck the status of the PS-A being monito

Chapter 3 PS-A Monitoring Features3-173.5 Checking the Error Log List3.5.1 DescriptionCheck the location and action of the previous error/alert on the

PS-3650A / PS-3651A Reference Manual3-183.5.2 Setup Procedure(1) Select [Control Panel] - [Administrative Tools] - [Event Viewer] to display the Even

• After hardware setup is completed, the OS (Windows® XP) must be used to create partitions and format (initialize) the HDD before any data or applica

Chapter 3 PS-A Monitoring Features3-19(3) The [Event Properties] screen appears. The error message is displayed in the [Description] area.

PS-3650A / PS-3651A Reference Manual3-203.6 Monitoring Errors/Alerts from a Remote Server3.6.1 DescriptionMonitor and control the System Monitor/RAS

Chapter 3 PS-A Monitoring Features3-213.6.2 System ConfigurationThe system employing this feature is configured as illustrated below.Server PCClient P

PS-3650A / PS-3651A Reference Manual3-22The status of the System Monitor/RAS feature is transferred to the Pro-Server via Ethernet from the System-Mo

Chapter 3 PS-A Monitoring Features3-23 List of Device Addresses*1 When monitoring the voltage with the device monitor, the unit is “mV”.*2 When monit

PS-3650A / PS-3651A Reference Manual3-243.6.3 Monitoring using Pro-Server with Pro-Studio or Pro-Server EX Setting Up the Client PS-A(1) Double-clic

Chapter 3 PS-A Monitoring Features3-25 Setting Up the Server PC(1) On the server PC, download the software from the Pro-face support site “Otasuke Pr

PS-3650A / PS-3651A Reference Manual3-263.7 Restarting/Shutting Down the PS-A from a Remote Server3.7.1 DescriptionRestart or shut down the PS-A unit

Chapter 3 PS-A Monitoring Features3-273.7.2 Setup Procedure(1) Execute the application on the server as well as on the PS-A. The application is store

PS-3650A / PS-3651A Reference Manual3-283.8 Setup Guide for the System Monitor PropertyThe System Monitor Property allows you to specify PS-A items y

1-11 Setting Up Software1. Software Configuration2. Setting Up an HDD with no Pre-installed OS3. Setting Up an HDD with Pre-installed OS4. PS-A Dedic

Chapter 3 PS-A Monitoring Features3-293.8.1 Voltage / Fan / Temperature / Backlight / DIN0 / DIN1• The Voltage, Fan, Temperature, Backlight and DIN1 t

PS-3650A / PS-3651A Reference Manual3-303.8.2 SMARTItem OperationEnableWhen this option is checked, monitoring of SMART starts.Alert ActionSpecifies

Chapter 3 PS-A Monitoring Features3-313.8.3 Remote RASItem OperationEnable When this option is checked, the remote RAS feature starts.Throw device Spe

PS-3650A / PS-3651A Reference Manual3-323.8.4 Watchdog TimerItem OperationEnable When this option is checked, the Watchdog Timer is enabled.Timeout(s

Chapter 3 PS-A Monitoring Features3-333.8.5 Remote reset • Nothing is displayed on PS3650A-T42S / PS3651A-T42S.Item OperationEnable When this option i

PS-3650A / PS-3651A Reference Manual3-343.9 Setup Guide for the System Monitor ScreenYou can check the status of the PS-A being monitored.Click the t

Chapter 3 PS-A Monitoring Features3-353.9.2 SMARTItem OperationDevice No. Displays the number assigned to the hard disk to be monitored.Model Displays

PS-3650A / PS-3651A Reference Manual3-363.10 Displayed Messages Error/Alert Pop-up MessagesWhen an error/alert occurs while the "Popup Message&

Chapter 3 PS-A Monitoring Features3-37 Messages Displayed on the Event Viewer ScreenThe error types/locations shown by the Event Viewer are as follow

PS-3650A / PS-3651A Reference Manual3-38 Bit Assign of Error Event, and Error MaskDevice Name Item BitError EventVcoreA Voltage Error ERR00VcoreB V

PS-3650A / PS-3651A Reference Manual1-21.1 Software ConfigurationIf you purchased a PS-A unit with the OS pre-installed, the software has been pre-in

Chapter 3 PS-A Monitoring Features3-39 Error Messages Displayed during Device Reading/WritingError CodeError MessageDecimal NumberHexadecimal Number9

PS-3650A / PS-3651A Reference Manual3-403.11 Restrictions Supported Pro-Server FeaturesThe following table lists the features of the Pro-Server that

4-14 Troubleshooting1. Problems and Countermeasures2. Recovery ProcedureThis chapter describes the countermeasures for problems with the PS-A and the

PS-3650A / PS-3651A Reference Manual4-24.1 Problems and CountermeasuresProblem Countermeasure and reference pageNothing appears on the screen.Is the

Chapter 4 Troubleshooting4-3The OS does not operate properly.I did not shut down or reboot the unit, but the “CMOS CHECK SUM ERROR” occurred.A possibl

PS-3650A / PS-3651A Reference Manual4-4The touch position recognized in the touch panel still deviates from the actual touch even after calibration.I

Chapter 4 Troubleshooting4-54.2 Recovery Procedure4.2.1 PS-A with no Pre-installed OSRefer to the manual for the installed OS and recover the OS.When

PS-3650A / PS-3651A Reference Manual4-6(5) After the Symantec Ghost™ starts, the [Question] dialog box will appear. “Partition sizes correct?” (6) Th

Chapter 4 Troubleshooting4-7(7) The [Question] dialog box will appear. Press the [Yes] button. It will be reconfirmed that the data of the hard disk i

PS-3650A / PS-3651A Reference Manual4-8